Universal Reflex Sensor
UM55NCT2
- Switching Frequency: 1 kHz
- Teach-In, external Teach-In
The transmitter and the receiver are integrated into a single housing. The sensor evaluates transmitted light reflected back from the object. The output is switched as soon as an object passes the selected range. Bright objects reflect more light than dark objects, and can thus be recognized from greater distances. These sensors are equipped for use with glass fiber optic cable. They can be used with or without glass fiber optic cable.
Optical Data
| Range | 500 mm |
| Switching Hysteresis | < 15 % |
| Light Source | Infrared Light |
| Wave Length | 880 nm |
| Service Life (T = +25 °C) | 100000 h |
| Max. Ambient Light | 10000 Lux |
| Opening Angle | 12 ° |
Electrical Data
| Supply Voltage | 10...30 V DC |
| Current Consumption (Ub = 24 V) | < 40 mA |
| Switching Frequency | 1 kHz |
| Response Time | 500 µs |
| On-/Off-Delay (RS-232) | 0...5 s |
| Temperature Drift | < 10 % |
| Temperature Range | -25...60 °C |
| Switching Output Voltage Drop | < 2,5 V |
| NPN Switching Output/Switching Current | 100 mA |
| Residual Current Switching Output | < 50 µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Teach Mode | NT,MT |
| Protection Class | III |
Mechanical Data
| Adjustment | Teach-In |
| Housing Material | Plastic |
| Full Encapsulation | yes |
| Degree of Protection | IP67 |
| Connection | M12 × 1; 4-pin |
Output
| NPN NO/NC switchable | yes |
| RS-232 with Adapterbox | yes |
Connection Diagram
Ctrl.Panel
- 06 = Teach Button
- 30 = Switching Status/Contamination Warning
Dimensioned Picture
All dimensions in mm (1 mm = 0.03937 Inch)
- 1 = Transmitter Diode
- 2 = Receiver Diode
Complementary Products
| Adapterbox A232 |
| Glass Fiber Optic Cable |
Data sheet
CAD Data
Software
Connection Technology
Mounting Technology
Fiber Optic Cables
Complementary Products