Reflex Sensor for Contrast Measurement
YP11MVV80
- Analog Output (0...10 V DC)
- Switching Frequency: 10 kHz
These sensors are especially well suited for high speed indication of contrast differences by means of an analog output voltage.
Optical Data
| Working Range | 50...100 mm |
| Measuring Range | 50 mm |
| Resolution | 20 mV |
| Switching Hysteresis | 200 mV |
| Light Source | Laser (red) |
| Wave Length | 660 nm |
| Service Life (T = +25 °C) | 100000 h |
| Laser Class (EN 60825-1) | 2 |
| Max. Ambient Light | 10000 Lux |
| Light Spot Diameter | 0,5 mm |
| at a Distance of | 100 mm |
Electrical Data
| Supply Voltage | 18...30 V DC |
| Cut-Off Frequency | 10 kHz |
| Response Time | 50 µs |
| Temperature Drift | 10 mV/K |
| Temperature Range | -10...60 °C |
| Switching Output Voltage Drop | 1,5 V DC |
| PNP Switching Output/Switching Current | 200 mA |
| Analog Output | 0...10 V |
| Short Circuit Protection | yes |
| Overload Protection | yes |
| Protection Class | III |
Mechanical Data
| Adjustment | Potentiometer |
| Housing Material | Plastic |
| Full Encapsulation | yes |
| Degree of Protection | IP67 |
| Connection | M12 × 1; 8-pin |
Output
| PNP NO | yes |
| Analog Output | yes |
Connection Diagram
Output Graph
- Sr = Switching Distance
- Ua= Output Voltage
 |
black 6 % |
 |
grey 18 % |
 |
white |
Ctrl.Panel
- 05 = Switching Distance Adjuster
- 18 = Light Adjustment
- 34 = Analog Voltage Output-/ Switching Status
Dimensioned Picture
All dimensions in mm (1 mm = 0.03937 Inch)
- 1 = Transmitter Diode
- 2 = Receiver Diode
Complementary Products
| Protection Housing Set ZSP-NN-02 |
| Protection Housing ZSV-0x-01 |
Data sheet
CAD Data
Connection Technology
Mounting Technology
Complementary Products