Transit Time Sensor for Measuring Tasks
X1TA101MHV80
- Analog Output (0...10 V/4...20 mA)
- Emitted light disengageable
- graphical display for easy operation
- Temperature Drift eliminable
These sensors have scratch-resistant optics and the emitted light can be switched off. They use the transit time measurement principle to measure the distance between the sensor and the object. Using a suitable reflector at the object, a highly accurate position measurement at large distances is also possible. The configurations are selected using a menu and can be protected by a password.
Optical Data
| Working Range | 0,2...100,2 m |
| Measuring Range | 100 m |
| Reference Reflector/Reflex Foil | 4 × RQ100BA |
| Resolution | 4...20 mm |
| Linearity | 0,05 % |
| Switching Hysteresis | 13...50 mm |
| Light Source | Laser (red) |
| Wave Length | 660 nm |
| Service Life (T = +25 °C) | 100000 h |
| Laser Class (EN 60825-1) | 1 |
| Beam Divergence | < 2 mrad |
| Light Spot Diameter | see Table 1 |
Electrical Data
| Supply Voltage | 18...30 V DC |
| Current Consumption (Ub = 24 V) | < 100 mA |
| Switching Frequency | 50 Hz |
| Measurement Rate | 1...100 /s |
| On-/Off-Delay | 0...10000 ms |
| Temperature Drift | 0,5 mm/K |
| Temperature Range | -25...60 °C |
| Switching Outputs | 2 |
| Switching Output Voltage Drop | < 2,5 V |
| Switching Output / Switching Current | 200 mA |
| Analog Output | 0...10 V / 4...20 mA |
| Short Circuit Protection | yes |
| Reverse Polarity and Overload Protection | yes |
| Protection Class | III |
Mechanical Data
| Adjustment | Teach-In |
| Housing Material | Plastic |
| Degree of Protection | IP68 |
| Connection | M12 × 1; 8-pin |
Output
| Error Output | yes |
| Configurable as PNP/NPN/Push-Pull | yes |
| Analog Output | yes |
Table 1
| Working Distance | 0 m | 40 m | 100 m |
| Light Spot Diameter | 5 mm | 80 mm | < 200 mm |
Connection Diagram
Ctrl.Panel
- 21 = Mode Button
- 60 = Display
Dimensioned Picture
All dimensions in mm (1 mm = 0.03937 Inch)
Complementary Products
| Analog Evaluation Unit AW02 |
| Protection Housing Set ZST-NN-02 |
| Reflector, Reflex Foil |
Feasible reflector distance
Reflector type, mounting distance
| RQ100BA | 5...100 m | |
| RF505 | 0,2...40 m | |
| RF508 | 0,2...40 m | |
| RF258 | 0,2...40 m | |
| ZRAF07K01 | 0,2...40 m | |
| ZRAF08K01 | 0,2...40 m | |
| ZRDF__K01 | 0,2...40 m |
Data sheet
CAD Data
Connection Technology
Mounting Technology
Complementary Products