wenglor sensoric gmbh :: Technical Data

Light Curtain Pick to Light

OLEB422C0102

360° visible, two-color job display
Error prevention during partial picking processes in shelves and storage locations
Low mounting thanks to integrated Reflector
Rugged aluminium housing

A reflector must be used in combination with these Light Curtains Pick to Light. The reflector is pre-installed on the rear of the housing whereby mounting and setup is made quick and easy. The integrated, two-color job display is visible from afar and around 360°. It can be used in blinking or shining mode and shows correct and incorrect picks.

Optical Data

Range	2000 mm
Min. Distance to Reflector	100 mm
Measurement Field Height (MFH)	420 mm
Beam Distance	30 mm
Switching Hysteresis	< 15 %
Light Source	Red Light
Polarization Filter	yes
Service Life (T = +25 °C)	100000 h
Max. Ambient Light	10000 Lux
Opening Angle	2,5 °
Two-Lens Optic	yes

Electrical Data

Supply Voltage	10...30 V DC
Current Consumption (Ub = 24 V)	< 50 mA
Switching Frequency	40 Hz
Response Time	12 ms
Temperature Drift	< 10 %
Temperature Range	-25...60 °C
Switching Output Voltage Drop	< 2,5 V
PNP Switching Output/Switching Current	200 mA
Residual Current Switching Output	< 50 µA
Short Circuit Protection	yes
Reverse Polarity Protection	yes
Overload Protection	yes
Protection Class	III

Mechanical Data

Adjustment	Teach-In
Housing Material	Aluminum
Degree of Protection	IP65
Connection	M12 × 1; 4-pin
Cable Length	250 mm
Housing Length (L)	546 mm
Reflector Length (RL)	486 mm